SUCCESS STORY
HMI MODERNIZATION
Replace the interface.
Keep production moving.
A serviceable, non-proprietary replacement for a fleet of aging boom-mounted HMIs—engineered around the operator experience and the facility's existing wiring.



PRODUCTION DUTY
CUSTOMER PROBLEM
Critical controls had become the weakest part of the machine.
The facility relied on a fleet of older boom-mounted HMIs that had controlled production machinery for more than a decade. Push buttons integrated into each bezel gave operators direct access to key machine functions.
Years of use wore down the button membranes until they became inoperative. Because those membrane controls could not be replaced by either the customer or the original vendor, the practical choices were to run without essential buttons or build a “Frankenstein” external button box to work around the failed interface.
AOTSOURCE SOLUTION
Familiar to operate.
Designed for Serviceability.
AoTSource engineered a replacement around a custom Rittal panel and readily available components from Eaton, Phoenix Contact, and other established suppliers. The new unit preserves the original button layout and machine functions, so operators retain a familiar experience.
Behind the interface, the design is completely different: a removable backplate provides direct service access, individual components can be changed quickly, and purpose-built connectors support fast installation into the facility's existing wiring.
The brighter, higher-resolution display also delivers improved touch response and multiple connectivity options. In this application, display, touch, and USB connectivity can extend more than 50 meters from the PC without performance degradation or vendor-proprietary extension technology.


DESIGN COMPARISON
From a Proprietary, obsolete product to a future-proof, maintainable system.
The upgrade improves the operator interface today while making future service, troubleshooting, and component replacement faster and more predictable.
| Evaluation | Current HMI Solution | AoTSource HMI Design |
|---|---|---|
| 01Cost | High lifecycle cost when a proprietary unit or custom workaround is required. | Lower lifecycle cost through a maintainable design built with standard components. |
| 02Serviceability | Sealed membrane controls are not replaceable by the customer or original vendor. | Removable backplate and field-replaceable buttons, controls, and connection hardware. |
| 03Improved Graphics | Aging, lower-brightness display with limited resolution and visibility. | Brighter, higher-resolution display for clearer machine information and graphics. |
| 04Better Touch Sensitivity | Older touch technology becomes less responsive as the interface ages. | Modern touch performance with improved sensitivity and operator response. |
| 05Non-proprietary Connectivity | Vendor-specific display and interface technology limits replacement choices. | Open connectivity for display, touch, and USB without a proprietary extension platform. |
| 06Quick Installation Connectivity | Workarounds and replacement changes can require extra rewiring and downtime. | Purpose-built connections mate with existing facility wiring for a faster installation. |
| 07Easy to Troubleshoot | Sealed construction and unavailable subcomponents make fault isolation difficult. | Accessible, modular hardware makes components easier to inspect, test, and replace. |
| 08Quick-Delivery Replacement Components | Specialized and obsolete parts can create long replacement lead times. | Readily available components from Eaton, Phoenix Contact, and other established suppliers. |
MODERNIZE WITHOUT STARTING OVER